Skip to main content

CLOSE

OPEN

CAREERS

TENDER INFO

CONTACT US

LIVE CHAT

The Hong Kong Plastic Machinery Performance Testing Centre - Machine Health Check Service

The service provides a quick diagnosis of your machines.

 

Injection Unit

Test No. Demonstration Test Name Definition Testing Standard
5.8 View Shot-to-Shot Weight Accuracy This test is used to determine the shot-to-shot stability of the products manufactured by the injection moulding machine. EUROMAP 5
5.11 View Pressure Spike Test This test determines the stability of the machine by measuring the pressure spike during injection. - -
5.15 N/A Injection System Test This test measures the maximum flow length within the spiral mould. - -

 

Clamping Unit

Test No. Demonstration Test Name Definition Testing Standard
5.6 View Mould Platen Parallelism Mould platen parallelism is the parallelism between the moving mould platen and the fixed mould platen. EUROMAP 9
5.7 View Mould Clamping Force Versus Tie Bar Elongation Mould clamping force is the force required to hold the two mould halves together during a moulding cycle. Tie bar elongation is the amount of stretching or strain on each of the four tie bars during mould clamping. EUROMAP 19